| Customization: | Available |
|---|---|
| Type: | Flat Die Biomass Pellet Machine |
| Voltage: | 380V/415V/220V |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husk, bark and other biomass as raw materials, and solidifies it into high-density pellet fuel through pretreatment and processing. Biomass pellet machine is divided into flat die biomass pellet machine and ring die biomass pellet machine.
Advantage:
1, Wood pellet machine can produce a variety of wood chips, straw, husk and other raw materials based biomass particles;
2, The use of cold pressing molding, extrusion molding and other molding technology, grease polishing polishing process makes biomass particles beautiful appearance, more compact structure;
3, Wood pellet machine high output, low energy consumption, low noise, low failure, machine fatigue resistance, continuous production, economic and durable.
4, The whole machine is made of special high-quality materials and advanced shaft transmission device, and the key components are made of high-quality alloy steel and wear-resistant materials;
5, The wood pellet machine mold is placed flat, the mouth is upward, and it is directly into the granulation mold from top to bottom;
6, The proportion of wood chips is very light, straight up and down, the sawdust into the press wheel rotation to the four sides, uniform compression particles;
7, Wood pellet machine is upward open, easy to heat, in addition to a set of air-cooled cloth bag dust, automatic refueling;
8, Wood pellet machine is a hard enlarged shaft, large cast steel bearing seat, its large bearing does not bear any
pressure, not easy to break, long life.
1. Use Wood Chipper, Wood Crusher to make wood logs, chips (or other materials) smaller.
2. Use Dryer (rotary drum dryer / Air-flow dryer) or add water to the sawdust(or other materials) till its moisture content between 8-15%, which is the best moisture content for pelletizing.
3. Put the sawdust into the pellet machine gradually. Large scale pellet production need a screw feeder to make sure stable feeding of raw material.
4. After pelletized, the pellets are of high temperature that is not suitable for direct packing. So they should be cooled by pellet cooler.
Then, pellets go through a vibrating sieve, where good pellets will be left, while broken ones or powder will be collected for reproduction.
5. After all the above procedures, pellets can be packed with a pellet packing machine. The use of biomass fuels is a new type of bio-energy.Raw Material of Biomass Pellet Machine
This product is suitable for pressing materials that are difficult to bond and form. Such as: rice husks, sunflower seed husks, peanut shells, and other melon and fruit husks; branches, bark and other wood scraps; various crop straws, such as: wheat straw, corn straw, reed straw, rice straw, cotton Rods, etc.; various chemical raw materials such as rubber, cement, ash and slag.
1. Raw materials diameter requirement : 3-5mm(If large ,crusher machine should be used)
2. Raw materials moisture:15-25%.(If beyond the scope,dryer machine should be used )It can replace wood, raw coal, fuel oil, liquefied gas, etc.It is widely used, such as:
1. Civil heating and domestic energy: high fuel utilization and easy storage.
2. Biomass industrial boiler: as the main fuel for industrial boilers, replacing coal combustion, reducing atmospheric emissions and pollution.
3. Power generation: It can be used as a fuel for thermal power generation.
| Model | Power(kw) | Capacity(kg/h) | Final size | Oversize | Weight |
| 450 | 55+1.5+0.37+0.55KW | 0.7-1.2t/h | 2-12mm | 2200*900*1600 | 3t |
| 550 | 75+1.5+0.37+0.55KW | 0.8-1.3t/h | 2-12mm | 2600*1300*2300 | |
| 560 | 90+1.5+0.37+0.55KW | 1-1.5t/h | 2-12mm | 2600*1300*2300 | 6.3t |
| 680 | 132+1.5+0.37+0.55KW | 2-2.5t/h | 2-12mm | 3200*1400*2400 | 8.5t |
| 850 | 220+2.2+0.37+0.55KW | 2-3t/h | 2-12mm | ||
| 850A | 220+2.2+0.37+0.55KW | 2.5-3.5t/h | 2-12mm | ||
| 880 | 315+3+0.37+0.55KW | 3-4t/h | 2-12mm |
Inner packing: we can use plastic packing if the client needs
Our company insists on the professional development based on the principle of innovation and honesty. We win the market with our advanced skills, high-quality products and considerate services.The products in our company have been exported to the South Africa, Pakistan, Vietnam and other counties with the advanced technology, reliable quality and reasonable price. We have also got the good reputations from customers at home and abroad.
Q: How about the quality of your products?
A:We put the quality in the first place based on the honesty. Our machines are manufactured strictly according to national and international standards, and we take a test on each equipment before the delivery. You can also use Trade Assurance by Alibaba for product quality protection, punctual shipment protection and payment protection.
){kind=link}