| Customization: | Available |
|---|---|
| After-sales Service: | Product Manual and Operation Instruction |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 1250/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Charcoal machine is the use of sawdust, crop straw (corn stalk, soybean straw, sorghum stalks, cotton stalks, rape stalks, peanut stalks, sunflower stalks), chaff, grass, shrub branches, bamboo truncated, feed head, bagasse, etc. as raw materials, after being crushed by the wood chip crusher, under the action of the screw thruster and heating ring to form a high temperature and high pressure area to process the loose raw materials into hollow rods. It has high density, small size, good flammability, and can replace firewood and coal. Generally, the outer diameter of the product is 50-60mm, the aperture is 15-20mm, and it is hollow four-corner or hexagonal cylindrical. It can also be made into spherical, granular and honeycomb coal shape.
1. Reasonable design, reliable manufacturing quality, simple structure, convenient operation, small size, less land occupation, labor saving, power saving characteristics.
2. The designed fully automatic control electric heating device can randomly adjust the dry humidity of the material, ensure the stability of discharge molding, and improve work efficiency.
3. The main parts are made of wear-resistant materials after special treatment, so they can be continuously pressed and produced, durable.
4. It is suitable for the pressing molding of various biomass raw materials, and has low energy consumption and high production efficiency.
5. The three bearings of the old core are changed to four, which increases the stability and durability of the machine.
6. Change the old oiled lubrication to oil-immersed lubrication, as long as there is no shortage of oil, it can be used for many years.
7. Increase the pitch to increase the feeding volume, thereby greatly increasing the output.
8. The structure of the forming cylinder is improved, the friction between the machinery and the raw material is reduced, and the density of the mandrel is increased.
Biomass wastes, such as sawdust,rice husks,coffee husks,rice straw, wheat straw,etc.
Material required: Moisture 8%-12%, size3-5mm
If moisture>12% may need dryer,We have air flow dryer and drum dryer.
If material size >5mm will need hammer mill or wood crusher.
Raw Material
Besides the material size must less than 5mm, the humidity of the raw materials is controlled in 8-12%.
Too wet or too dry will cause a bad forming effect.
If the material too big, we will recommend you crusher according to your requirement.
If your material moisture over 12%, we have a sawdust drying machine. After crushing, the material was delivered to the drying machine, then it was sent to forming machine.Final Product
The available shape: cylindrical, square, hexagonal, hollow quadrangular, pentagon, pentagon with edge, hexagon with edge.
The available diameter could be: 45mm, 50mm,60mm,70mm,80mm with 15-20 mm hole in it and so on.
The sawdust produces free radicals, bifunctional under the hot and high pressure condition of the cow dung briquettes making machine.
The sawdust can be combined each other closely through a covalent bond.once formed, the combination will remain stable in case there is no external damage, more stable after cooling.
It can used as fuel, boiler heating, cooking, and other field.
Especially after carbonized, not only it has long burning time, but also smokeless, smelless, clean, widely used in barbecue market.
){kind=link}