| Type: | Jaw Crusher |
|---|---|
| Motor Type: | Copper |
| Motor Power: | 7.5-75kw |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Two jaw plates are the work parts of jaw crusher: the first is fixed jaw, fixed on the front wall of the body vertically (or the upper part inclines outward slightly). The other is the movable jaw, inclined. It and the fixed jaw compose of the crushing chamber (the working chamber), whose upper part is bigger, while the bottom is smaller. The movable jaw plate makes periodic alternating motion to the fixed jaw plate, thus they are separated and close to each other in turn. When they are separated, the material enters the crushing chamber and the finished product is discharged from the lower part. When they are close to each other, the material between two jaw plates is crushed by being extruded, bent and split.
Working Principle
When the jaw crusher is working, the movable jaw plate makes periodic alternating motion to the fixed jaw plate, thus they are separated and close to each other in turn. When they are close to each other, the material between two jaw plates is crushed by being extruded, bent and split. When they are separated, the material crushed is discharged from discharge gate by gravity.
Application Area
Raw Material
Jaw crushers can be widely used in quarry, metallurgy, construction, cement, chemical industry, and other industries. In quarries, it is usually used to crush stone, limestone, granite, marble, and other ores; in metallurgy, construction, cement, and other industries, it is used to crush materials with high hardness, such as coal ash, limestone, iron ore wait.
| Model | Max Feeding Size(mm) | Discharging Size(mm) | Capacity(t/h) | Weight(t) | Motor Power(kw) |
| PE150*250 | 125 | 10-40 | 1-3 | 0.7 | 5.5 |
| PE150*750 | 120 | 18-48 | 8-25 | 3.8 | 15 |
| PE250*750 | 210 | 15-60 | 13-35 | 6.5 | 30 |
| PE200*300 | 120 | 18-22 | 3-8 | 1.5 | 11 |
| PE250*400 | 200 | 20-50 | 5-20 | 3 | 15 |
| PE400*600 | 350 | 40-100 | 15-60 | 7 | 30-37 |
| PE500*750 | 425 | 50-100 | 40-110 | 12 | 55 |
| PE600*900 | 480 | 65-160 | 90-180 | 17 | 75 |
| PE250*1000 | 210 | 25-60 | 15-50 | 7 | 30-37 |
| PE750*1060 | 630 | 80-140 | 110-320 | 29 | 90-110 |
| PE900*1200 | 750 | 95-165 | 220-450 | 58 | 110-132 |
| PE1000*1200 | 850 | 200-300 | 280-560 | 69 | 110-160 |
| PE1200*1500 | 850 | 150-300 | 400-800 | 100 | 160-220 |
Features
1, Effectively solve the original limestone crusher due to low output caused by high operating rate, no maintenance
time problems;
2, Can complete the crushing of large pieces of limestone, the maximum crushing particle size of 1000*1200mm,
effectively solve the original "one side is the shortage of limestone supply, while storing a large number of large
pieces of limestone can not be used";
3, The mixing uniformity of the two materials is good, and the addition amount of desulfurized limestone is greatly
increased. The addition amount can reach 60%, effectively reducing the cost of raw materials;
4, Electricity consumption has decreased. 1 ton of limestone power consumption reduced by 1-2kwh /t can save
electricity cost 100,000 yuan per year;
5, The waste particle size is small, only 2-15mm effectively solves the problem of the original limestone particle
size, often blocking the rink and even affecting the output of the mill.
Henan Mingxin Machinery Co., Ltd is a company that integrates science, industry and trade. The company mainly sells mechanical equipment and accessories, pipeline equipment, refractory materials, abrasive materials, water purification equipment, wire and cable. Our company follows the human-oriented, honest, pioneering entrepreneurial spirit with scientific and technological innovation. We have always regarded the technology as the motive force, the market as the orientation to make the products first-class.
Q: How about the price?
A: We pursue small profits but quick turnover, and we can give you lower price than other trading companies. If the product is really suitable and can benefit you, the price is negotiable.
Q: Do you provide equipment operation training?
A: Yes. We can send professional engineers to the working site for equipment installation, adjustment, and operation training. All of our engineers have passports.
Q: When do you deliver the goods?
A:We usually deliver the goods within 10 days depending on detailed product. We will advise the detailed delivery time according to your specific inquiry.
Q: Can you help chose suitable products?
A: Yes. We have many experts who have worked in this field for many years. They can help you select the most suitable products according to your actual condition. And they can design proper process flow based on your special situation. If necessary, we can even send professionals to your local place for site planning and work-flow design.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}